The glass-lined condenser is a condensing device with a small volume, a light weight and a compact structure.

1. Small size, light weight and compact structure. A P1 type glass-lined plate condenser with a condensation area of 10 square meters is filled with cooling water of only 960 kg. To

2. Compared with the glass-lined sleeve condenser and graphite heat exchanger of the same area, the condensing efficiency of this equipment can be increased by 1-2 times. To

3. Insulation, the glass layer is tested by 20KV high voltage, and it is qualified if it is not conductive;

4. After a certain period of use, if any part is damaged, it can be partially replaced or reduced by a single chip, which will not cause the whole machine to be scrapped or stop production. Greatly extend the service life of the whole machine. To

5. The condensation of hot air flow is exchanged by the reverse phase flow of hot air flow and cooling water. The spacing of the slices is small and uniform; the medium spreads repeatedly and merges to improve the condensation efficiency and eliminate the phenomenon of air leakage. In general, tap water can be used as the condensate to achieve a good condensing effect. When necessary, the cooling water layer can be connected in parallel and can greatly improve the condensation efficiency.