Any equipment is used when it is scrapped, so the use of glass-lined reactors is no exception, but in the process of using glass-lined reactors, if you want to correctly determine the scrap standard of the equipment, you need to follow the specified requirements. So as to ensure the safe use of the equipment.
1. First of all, it needs to be judged according to the degree of uniform corrosion of the wall thickness of the kettle, because the equipment will be accompanied by a manual when it is first purchased. If the thickness is smaller than the limit value specified in the manual, it needs to be replaced. , And because many materials in the equipment are corrosive when the equipment is in operation, it needs to be replaced if the corrosion area of ​​the equipment also exceeds the limit of the manual.
　　2. When the equipment has some serious defects, it can be judged to be scrapped. Of course, when judging scrap based on this defect, it is necessary to ensure that the normal operation of the glass-lined reactor cannot be satisfied because of this defect and there is no possibility of repair.
　　3. When there is serious corrosion due to alkali embrittlement, it can be applied for scrap treatment, and when the kettle body has cracks and cannot be repaired, new equipment needs to be replaced.
　　4. When the equipment is found to be deformed severely during the hydraulic test, it means that the equipment cannot be used normally. The above is the method of judging the scrap of the glass-lined reactor. When we usually use it, we must not wait until it is suddenly replaced during operation and then replace it, so that the materials in the reactor are wasted, so When the equipment is about to be scrapped, we have to replace it in time, which can also avoid some economic losses.
The equipment is judged strictly in accordance with the scrapping principle of the glass-lined reactor to better ensure the operation and use efficiency of the equipment. In addition, if you want to extend its service life during use, it is necessary to conduct regular equipment inspection and maintenance to ensure Equipment.