Composition description of enamel glaze for glass-lined reactor
2021-11-19
Where a container is heated or cooled through a jacket (Fig. B)
- Categories:Enamel Knowledge
- Author:
- Origin:
- Time of issue:2023-07-01
- Views:0
(Summary description)
Where a container is heated or cooled through a jacket (Fig. B)
(Summary description)
- Categories:Enamel Knowledge
- Author:
- Origin:
- Time of issue:2023-07-01
- Views:0
Information
(Example 1) Minimum permissible temperature (Tj<TW) for injection of cold liquid into a jacket of a hot con-
tainer(Tw=200°℃)
Step:
1. Find out the wall temperature Tw = 200℃ on the abscissa axis of Figure B.
2. Draw a vertical line along the dot at 200C and intersect it at the edge of the blue area.
3. Make a horizontal line parallel to the abscissa and intersect the Tj points on the longitudinal coordinates.
Tjmin = 65°℃
(Example 2) Maximum permissible temperature (Tj> TW) for hot liquid injected into the jacket of a hot con-
tainer (Tw=30°℃)
Step:
1. Find out the wall temperature Tw = 30C on the abscissa axis of Figure B.
2. Draw a perpendicular line along the dot at 30C and intersect it at the edge of the red area.
3. Make a horizontal line parallel to the abscissa at the intersection point, which is comparable to the Tj point
on the longitudinal coordinate. Tjmax = 170℃
Scan the QR code to read on your phone
Previous:
Installation of Glass Enamel Equipment
Recommended news
Have questions or suggestions?
National Service Hotline：+86-18953371519
Monday to Sunday: 7:30-17:00
After-sales service
Your satisfaction drives us forward
About us
The company mainly produces glass-lined equipment, first- and second-class carbon steel, stainless steel non-standard pressure vessels and glass-lined equipment maintenance and firing.
客户留言
Description:
